Determination of Immunosuppressive Pharmaceuticals in Whole Blood Following Kidney Transplantation by High-performance Liquid Chromatography–Tandem Mass Spectrometry

Cyclosporine, tacrolimus, sirolimus, and everolimus are commonly used immunosuppressants following organ transplantation. Their monitoring is used to determine the optimal dose for therapeutic effectiveness and minimize toxicity. High-performance liquid chromatographic–tandem mass spectrometry with positive electrospray ionization and multiple reaction monitoring mode was validated for the determination of cyclosporine A, tacrolimus, sirolimus, and everolimus in whole blood. A C18 analytical column was employed with a gradient elution of pH 4.0 aqueous 10?mmol/L ammonium acetate and acetonitrile. For the pretreatment of whole blood, simple protein precipitation was used with methanol:zinc sulfate. The calibration curves were linear from 20.0 to 1000?ng/mL for cyclosporine A, 1.0 to 50?ng/mL for tacrolimus and sirolimus, and 1.0 to 30?ng/mL for everolimus. The intra-assay precision and inter-assay precision were less than 15%. The method provides reliable and reproducible results according to the linearity, precision, accuracy, recovery, and matrix effects. The method has been introduced to routine clinical practice in Slovakia for the determination of immunosuppressants in patients after kidney transplantation.     

Solving the robust two-stage capacitated facility location problem with uncertain transportation costs

In this study, we start from a multi-source variant of the two-stage capacitated facility location problem (TSCFLP) and propose a robust optimization model of the problem that involves the uncertainty of transportation costs. Since large dimensions of the robust TSCFLP could not be solved to optimality, we design a memetic algorithm (MA), which represents a combination of an evolutionary algorithm (EA) and a modified simulated annealing heuristic (SA) that uses a short-term memory of undesirable moves from previous iterations. A set of computational experiments is conducted to examine the impact of different protection levels on the deviation of the objective function value. We also investigate the impact of variations of transportation costs that may occur on both transhipment stages on the total cost for a fixed protection level. The obtained results may help in identifying a sustainable and efficient strategy for designing a two stage capacitated transportation network with uncertain transportation costs, and may be applicable in the design and management of similar transportation networks.     

Effects of a High-Molecular-Weight Polysaccharides Isolated from Korean Persimmon on the Antioxidant,Anti-Inflammatory,and Antiwrinkle Activity

Persimmon (Diospyros kaki), a familiar and widespread fruit worldwide, is known to exhibit several physiological effects because of the presence of pharmacologically active compounds called phytochemicals. However, its high-molecular-weight compounds, particularly polysaccharides, have not been extensively studied. In this study, D. kaki extract (DK) was fractionated into low- and high-molecular-weight fractions (DK-L and DK-H, respectively) through ethanol fractionation, and their effects on antioxidant, anti-inflammatory, and antiwrinkle activities were investigated by an in vitro system. DK-H contained significantly higher contents of neutral sugar, uronic acid, and polyphenols compared to DK and DK-L. Furthermore, DK-H exhibited significantly improved pharmacological activities, such as antioxidant, anti-inflammatory, and antiwrinkle properties, compared to those of DK and DK-L, demonstrating that DK-H may play an important role in mediating the beneficial effects of persimmon. Sugar composition analysis and molecular characterization indicated that DK-H consisted of a galacturonic acid (GalA)-rich polysaccharide with a molecular weight of >345 kDa that mainly comprised GalA and small amounts of neutral sugar and polyphenol residues. These results suggest that the bioactive fraction DK-H is likely to be a GalA-rich pectic polysaccharide containing a small number of polyphenol residues, which may be a novel candidate in the pharmaceutical and cosmeceutical industries.     

三功能策略设计制备具有优异低温抗积碳性能的Ni-CeO2@SiO2催化剂催化甲烷干重整反应

随着全球人为温室气体排放量(主要是甲烷和二氧化碳)的增加,全球变暖的趋势逐渐增加,因此,迫切需要通过各种技术来捕获和利用这些温室气体.甲烷干气重整反应(DRM)可以有效地将甲烷和二氧化碳这两种资源丰富、价格低廉的温室气体转化为高附加值化学品,减少它们向大气排放.尽管DRM工艺的应用具有许多优势,但是反应期间碳沉积和活性组分的烧结是阻碍其工业应用的两个主要原因.这些碳沉积物可能覆盖活性中心或阻塞催化剂的孔道,从而导致催化剂活性降低.镍基催化剂因其价格低廉、初始活性高和资源丰富而得到广泛的应用.但应用于DRM反应的Ni基催化剂在反应中容易烧结和积碳,导致催化剂迅速失活.为解决上述问题,本文从三功能策略角度出发,即SiO2壳层的限域作用和Ni-Ce之间的协同作用以及CeO2的消除积碳作用,采用原位一锅法设计合成了一种限域型Ni-CeO2核壳结构催化剂(Ni-CeO2@SiO2).通过X射线衍射、透射电子显微镜、能量色散X射线光谱、N2吸附/脱附、氢气程序升温还原和脱附、氧气程序升温脱附、拉曼光谱、热重分析和原位漫反射红外傅里叶变换光谱测试对催化剂进行了系统的表征,来揭示催化剂的理化性质和反应机理.催化剂应用于甲烷干气重整反应结果表明,在温度区间为550～800℃时,与传统浸渍法合成的催化剂相比,Ni-CeO2@SiO2催化剂具有更高的活性.高温800℃下的稳定性测试结果显示,传统浸渍法合成的催化剂在反应20 h后就出现了大量的积碳且活性下降明显;而Ni-CeO2@SiO2催化剂在800℃下反应100 h后未检测到积碳,并且催化剂中的Ni纳米颗粒的平均粒径从5.01 nm仅增长到5.77 nm,表现出很好的高温抗积碳和耐烧结性能.值得注意的是,Ni-CeO2@SiO2催化剂在低温600℃(形成碳沉积的最可能温度区域)下反应20h后也未检测到积碳的形成,表现出催化剂良好的低温稳定性和抗积碳性能.这可能归因于对Ni-CeO2@SiO2催化剂的三功能作用,即多孔二氧化硅壳层的限域作用、Ni与CeO2之间强的金属-金属氧化物相互作用以及具有丰富活性氧物种CeO2的消除积碳的作用.通过原位漫反射红外傅里叶变换光谱测试来探究反应机理.结果 表明,DRM反应在Ni-CeO2@SiO2催化剂上遵循L-H机理,添加CeO2可以消除碳沉积并促进CO2活化.该三功能策略为设计其他应用于DRM的高性能催化剂提供了指导,有望加快该工艺的工业化.     

DSAZn与槲皮素的配位结合及对槲皮素的高灵敏度检测

槲皮素为天然黄酮类化合物,可用于高血压、高血脂、心血管疾病、癌症等的预防和治疗;槲皮素的定量检测在生物化学、临床医学等领域尤为重要。利用分子荧光物质(DSAZn)的聚集诱导发光现象(AIE),通过配位作用识别靶标分子槲皮素,结合激发态电子转移原理,提出了一种AIE型荧光分子对槲皮素的高灵敏度、高选择性检测方法。实验研究了pH 7.0的PBS缓冲液中DSAZn的荧光随着五种药物分子（槲皮素、淫羊藿素、异鼠李素、芦丁、多巴胺）加入后的变化情况。采用荧光分光光度计,以415 nm为激发波长,扫描435~680 nm的荧光发射光谱。采用紫外分光光度计,扫描DSAZn 250~750 nm的紫外吸收光谱。紫外检测表明中药分子槲皮素可以与AIE荧光探针形成复合物,因此加入槲皮素后AIE探针的荧光被静态猝灭。荧光检测表明五种药物分子对荧光探针的猝灭强弱有明显差异,槲皮素与DSAZn结合常数为1.34×107 L·mol-1,比其他四种药物分子和DSAZn的结合常数高出一个数量级,显示出DSAZn对槲皮素具有较好的选择性。槲皮素的检测限为3.07 nmol·L-1,低于诸多文献已报道的参考值,表明DSAZn对槲皮素的识别具有较高的灵敏度。由荧光滴定光谱和荧光滴定曲线得到槲皮素对DSAZn的滴定方程为：y=0.013 4x-0.294 82,槲皮素浓度在0~5 μmol·L-1范围内线性关系良好,线性相关系数r=0.994 3。由此构建出一种AIE型荧光分子对槲皮素的高选择性、高灵敏度检测方法,该方法操作简便、重复性好,为具有相似结构药物的检测提供了新的研究思路。     

Simultaneous determination of mitotane,its metabolite,and five steroid hormones in urine samples by capillary electrophoresis using β-CD2SDS1 complexes as hydrophobic compounds solubilizers

Mitotane is a cytotoxic drug used in the treatment of inoperable adrenocortical carcinoma, it inhibits steroidogenesis as well, and therefore monitoring the level of steroid hormones in patients treated with mitotane is a crucial point of therapy. Hence, we have developed a simple, fast, and efficient electrophoretic method combined with reverse polarity sweeping as online preconcentration technique and dispersive liquid–liquid microextraction for the simultaneous determination of mitotane, its main metabolite DDA, and five steroid hormones (progesterone, testosterone, epitestosterone, cortisol, and corticosterone) in urine samples. In addition, a new sample matrix consisting of β-CD₂SDS₁ complexes for a high hydrophobic compounds solubilization was developed. Approach based on the application of β-cyclodextrin and SDS complex of a ratio 2:1 allowed for hydrodynamic injection into the capillary of a solution containing both mitotane and other analytes. The detection limits of the analytes for the reverse polarity sweeping-dispersive liquid–liquid microextraction method were found to be in the range of 1.5–3 ng/mL, which were approximately 1000 times lower than in the conventional hydrodynamic injection (5 s, 0.5 psi) without any preconcentration procedure. All analytes were completely resolved in less than 13 min by uncoated silica capillary with an inner diameter of 75 μm (ID) × 60 cm. Electrophoretic separation was performed in reverse polarity with a voltage of –25 kV with a background electrolyte (BGE) consisting of 100 mM SDS, 25% ACN, 25 mM phosphate buffer (pH 2.5), and 7 mM β-cyclodextrin.     

Review on the thickness measurement of ultrathin oxide films by mutual calibration method

Mutual calibration was suggested as a method to determine the absolute thickness of ultrathin oxide films. It was motivated from the large offset values in the reported thicknesses in the Consultative Committee for Amount of Substance (CCQM) pilot study P-38 for the thickness measurement of SiO₂ films on Si(100) and Si(111) substrates in 2004. Large offset values from 0.5 to 1.0 nm were reported in the thicknesses by ellipsometry, X-ray reflectometry (XRR), medium-energy ion scattering spectrometry (MEIS), Rutherford backscattering spectroscopy (RBS), nuclear reaction analysis (NRA), and transmission electron microscopy (TEM). However, the offset value for the thicknesses by X-ray photoelectron spectroscopy (XPS) was close to zero (−0.013 nm). From these results, the mutual calibration method was reported for the thickness measurement of SiO₂ films on Si(100) by combination of TEM and XPS. The mutual calibration method has been applied for the thickness measurements of hetero oxide films such as Al₂O₃ and HfO₂. Recently, the effect of surface contamination was reported to be critical to the thickness measurement of HfO₂ films by XPS. On the other hand, MEIS was proved to be a powerful zero offset method which is not affected by the surface contamination. As a result, the reference thicknesses in the CCQM pilot study P-190 for the thickness measurement of HfO₂ films on Si(100) substrate were determined by mutual calibration method from the average XRR data and MEIS analysis. Conclusively, the thicknesses of ultrathin oxide films can be traceably certified by mutual calibration method and most thickness measurement methods can be calibrated from the certified thicknesses.     

Large amplitude oscillatory shear behavior of PEO-PPO-PEO triblock copolymer solutions

Rheological properties of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer solution in both linear and nonlinear regions have been investigated. PEO-PPO-PEO triblock copolymer solution shows a dramatic change in mechanical properties as temperature changes. PEO-PPO-PEO triblock copolymer undergoes a transition from sol to gel with increase of temperature. During this transition the copolymer solution passes through three different stages, namely sol, soft gel, and hard gel. In our previous research (Hyun et al. in J Non-Newtonian Fluid Mech 55:51–65, 2002), large amplitude oscillatory shear (LAOS) behavior was found to be very sensitive to the generated microstructures. In this study, we investigated the relationship between the LAOS type and the microdomain structure. Newtonian behavior is observed in sol region, while there appear two kinds of LAOS types in the soft gel region. One is type I (G′, G′′ decreasing) and the other is a combination of type I and type IV (G′, G′′ increasing followed by decreasing). Type III (G′ decreasing, G′′ increasing followed by decreasing) is observed in the hard gel region. We compared the shape of stress curves, Lissajous pattern, and Fourier transform (FT) rheology of hard gel and soft gel under LAOS, and tried to relate the complex LAOS behavior with the microstructural change. From these investigations, it was found that the LAOS behavior and the stress pattern at large strain are closely related to the microdomain structure of PEO-PPO-PEO triblock copolymer, and provide a lot of useful information on the microstructures induced by large deformation.     

Detailed measurement of heat/mass transfer and pressure drop in a rotating two-pass duct with transverse ribs

The present study investigates the convective heat/mass transfer and pressure drop characteristics in a rotating two-pass duct with and without transverse ribs. The Reynolds number based on the hydraulic diameter is kept constant at 10,000 and the rotation number is varied from 0.0 to 0.2. When rib turbulators are installed, heat/mass transfer and friction loss are respectively augmented 2.5 times and 5.8 times higher than those of the smooth duct since the main flow is turbulated by reattaching and separating on the vicinity of the duct surfaces. Differences of heat/mass transfer and pressure coefficient between leading and trailing surfaces result from the rotation of duct, so that Sherwood number ratios and pressure coefficients are high on the trailing surface in the first-pass and on the leading surface in the second-pass. In the turning region, a pair of Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequently heat/mass transfer and pressure drop characteristics also change. As the rotation number increases, the discrepancies of the heat/mass transfer and the pressure coefficient enlarge between the leading and trailing surfaces.